体积应变对立方钛酸铅电子结构和光学性质的影响

本文利用第一性原理方法计算并分析了体积应变(-11%~11%)对立方顺电相PbTiO₃的结构、稳定性、电子结构和光学性质的影响。研究发现体积应变后PbTiO₃形成焓增大,稳定性下降,其中压应变对其稳定性的影响比拉应变大。当受到拉伸应变时,立方PbTiO₃由直接带隙半导体变为间接带隙半导体,且带隙随应变增大呈先增大后降低的趋势。在发生压应变时,从复介电函数、复折射率及吸收系数的分析结果可知,在自然光照下PbTiO₃的光吸收能力仅在个别波段有所增大,但总体呈减弱趋势,当产生拉伸应变时,介电峰、吸收峰红移,表明PbTiO₃在可见光范围内光吸收能力增强,并且当应变增大到11%时,PbTiO₃的吸收能力远高于本征立方相。     

Energy band modulation of GaAs/Al0.26Ga0.74As quantum well in 3D self-assembled nanomembranes

In this study, we investigate the modulation of energy band in 3D self-assembled nanomembranes containing GaAs/Al_0.26Ga_0.74As quantum wells (QWs). Photoluminescence (PL) characterizations demonstrate that the self-assembled structures have different optical transition properties and the modulation of the energy band is thus realized. Detailed spectral analyses disclose that the small strain change in structures with different curvatures cannot cause remarkable change in energy bands in Al_0.26Ga_0.74As layer. On the other hand, the optical transitions of GaAs QW layer is influenced by the strain evolution in term of light emission intensity. We also find the first order Stark effect in rolled-up nanomembrane with diameter of 150 μm, which is closely connected with the coupling effect between the deformation potential and the piezoelectric potential. Our work may pave a way for the fabrication of high performance rolled-QW infrared photo-detectors.     

单晶金刚石p型和n型掺杂的研究

超宽禁带半导体材料金刚石在热导率、载流子迁移率和击穿场强等方面表现出优异的性质,在功率电子学领域具有广阔的应用前景。实现p型和n型导电是制备金刚石半导体器件的基础要求,其中p型金刚石的发展较为成熟,主流的掺杂元素是硼,但在高掺杂时存在空穴迁移率迅速下降的问题;n型金刚石目前主流的掺杂元素是磷,还存在杂质能级深、电离能较大的问题,以及掺杂之后金刚石晶体中的缺陷造成载流子浓度和迁移率都比较低,电阻率难以达到器件的要求。因此制备高质量的p型和n型金刚石成为研究者关注的焦点。本文主要介绍金刚石独特的物理性质,概述化学气相沉积法和离子注入法实现金刚石掺杂的基本原理和参数指标,进而回顾两种方法进行单晶金刚石薄膜p型和n型掺杂的研究进展,系统总结了其面临的问题并对未来方向进行了展望。     

Analyzing the coexistence of DSRC and Wi-Fi networks using the Poisson line Cox process

Vehicular networks can aid in traffic monitoring, autonomous driving, and car accidents prevention. Yet, the deployment of these networks has been delayed due to the limited spectrum, especially for the case of unlicensed operations. To handle this issue, the Federal Communications Commission (FCC) proposed to permit Wi-Fi devices to operate in the 5.9 GHz band allocated to the intelligent transportation system (ITS). In a recent work, we analyzed the impact of the coexistence of dedicated short range communications (DSRC) and Wi-Fi on future DSRC network deployments by developing a stochastic geometry analytical model that considers a dynamic medium access probability (MAP) of DSRC nodes which uses carrier sense multiple access with collision avoidance (CSMA/CA). This previous work was based on the standard 2D homogeneous Poisson Point Process (PPP) model. In this work, we model the roads using the more applicable but more complex Poisson line process (PLP) Cox point process. We generate performance metrics represented through coverage probability and area system throughput, and we compare these results to our earlier work. The importance of this work is two-fold. First, it allows a further understanding of the impact of DSRC-Wi-Fi coexistence on future DSRC network deployments, and second, it highlights the effectiveness of the PLP in modeling the distribution of vehicles in an area by producing more accurate performance results.     

Selective Excitation of Band Extrema in Valley Photonic Crystals

Flexible control of building blocks of photonic crystals enables achieving desirable band structures. Exploration of photonic band extrema has brought many fantastic features to design artificial optical materials, such as Brillouin‐zone‐corner extrema for valley photonic materials and zone‐center extremum for zero‐index metamaterials. However, two such kinds of extrema are always found independently in different photonic crystals. In this work, a kind of valley photonic crystals possessing both zone‐center and zone‐corner band extrema almost at the same frequency is proposed. Inspired by antennas theory, a three‐antenna array (TAA) source is devoted to individually manipulate each extremum. The correlation coefficient is given to determine the coupling efficiency between the TAA source and extrema eigenmodes. By using a source with a high correlation coefficient, these extrema bulk states are selectively excited consistent with their eigenfields. Furthermore, three control cases are shown that multiple extrema points are simultaneously excited, in order to confirm the validity of the correlation coefficient. Finally, a potential application of a beam‐steering device is proposed through selective excitation of ternary extrema. This work develops binary valley states into ternary mix states, rendering more degrees of freedom for on‐chip optical information transport, particularly for beam steering and mode division multiplexing.     

Low band‐gap diketopyrrolopyrrole‐containing polymers for near infrared electrochromic and photovoltaic applications

Donor–acceptor type polymers bearing diketopyrrolopyrrole and 3,4‐ethylenedioxythiophene units are reported. The polymers are green and exhibit very low band‐gaps (1.19 eV) with strong and broad absorption (maxima of about 830 nm) in the near infrared (NIR) region in their neutral film states. The polymers display color changes between dark green and light blue with exceptional optical contrasts in the NIR regions of up to 78 and 63% as thin films and single‐layer electrochromic devices, respectively. Fast switching, good stabilities as well as high coloration efficiencies (743–901 cm² C^?1) were also observed. The polymers could also be potentially used as photovoltaic material, with a power conversion efficiency of up to 1.68%. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1287–1295     

Engineering nanostructures of CuO-based photocatalysts for water treatment: Current progress and future challenges

Nowadays, increasing extortions regarding environmental problems and energy scarcity have stuck the development and endurance of human society. The issue of inorganic and organic pollutants that exist in water from agricultural, domestic, and industrial activities has directed the development of advanced technologies to address the challenges of water scarcity efficiently. To solve this major issue, various scientists and researchers are looking for novel and effective technologies that can efficiently remove pollutants from wastewater. Nanoscale metal oxide materials have been proposed due to their distinctive size, physical and chemical properties along with promising applications. Cupric Oxide (CuO) is one of the most commonly used benchmark photocatalysts in photodegradation owing to the fact that they are cost-effective, non-toxic, and more efficient in absorption across a significant fraction of solar spectrum. In this review, we have summarized synthetic strategies of CuO fabrication, modification methods with applications for water treatment purposes. Moreover, an elaborative discussion on feasible strategies includes; binary and ternary heterojunction formation, Z-scheme based photocatalytic system, incorporation of rare earth/transition metal ions as dopants, and carbonaceous materials serving as a support system. The mechanistic insight inferring photo-induced charge separation and transfer, the functional reactive radical species involved in a photocatalytic reaction, have been successfully featured and examined. Finally, a conclusive remark regarding current studies and unresolved challenges related to CuO are put forth for future perspectives.     

Properties of RhP predicted by first-principles

Using density functional theory combined with a global crystal structure search with the particle swarm optimization method, we propose three stable three-dimensional (3D) metallic RhP structures, namely, the Cmcm (RhP-I), P6/mmm (RhP-II), and P6₃mc (RhP-III) phases. All these structures are found to be dynamically stable through vibrational normal mode calculations, indicating that they could be successfully synthesized in experiments. We show that the RhP-I phase has a relatively high thermodynamic stability and high mechanical strength in comparison with the others. The RhP-II and RhP-III phases have porous structures which could accommodate small atoms or molecules. However their thermodynamics are poor, especially the RhP-III phase. The RhP-II structure is stable at 500 K, but the RhP-III fails to survive even at the freezing point of water. Importantly, all these materials have one dimensional conducting channels corresponding to ultrahigh Fermi velocities. Moreover, the porous hexagonal RhP-II and III structures exhibit excellent ability to trap lithium, hydrogen, oxygen, and boron atoms. The RhP-II structure could be especially useful for directly dissociating the hydrogen molecule into two atoms without an energy barrier. In the present study, we identify three new metallic structures to the family of RhP structures, and anticipate their potential for technological applications.     

基于PLC 的中央空调制冷系统变频控制研究

针对现有中央空调系统能源消耗严重的现状,基于可编程逻辑控制器(Programmable Logic Controller,PLC)对中央空调系统进行变流量节能改造。分析改造后中央空调系统的结构组成和变频运行原理,并提出适用于冷冻水泵和冷却水泵的分段速温差控制和PID温差控制设计方案。控制硬件选用三菱FX3U系列PLC和台达VFD-EL变频器,软件选用GX Work2编程软件及力控组态软件。将控制方案进行实验验证,实验结果表明,所设计的两种控制策略不仅跟随系统末端负荷变化快速达到稳定运行状态,提高运行能效比,而且节能效果显著,节能率分别为40.2%和48.7%。     

Transition probabilities of the X1Σ+, A1Π, B1Δ, C1Σ+, and D1Π states of the AlO+ cation

ABSTRACT

This study computes the potential energy curves of the X¹Σ⁺, A¹Π, B¹Δ, C¹Σ⁺, and D¹Π states of AlO⁺ cation and the transition dipole moments between them. The orders of the rotationless radiative lifetimes are 10–100?μs for the A¹Π state, 1–1000?ms for the B¹Δ state, 10?ns for the first well and 100?ns for the second well of the C¹Σ⁺ state, and 1?μs for the D¹Π state. Emissions of the B¹Δ–A¹Π and D¹Π–C¹Σ⁺ systems are so weak that they are hardly measured via spectroscopy, the emissions of the C¹Σ⁺–X¹Σ⁺, C¹Σ⁺–A¹Π, and D¹Π–X¹Σ⁺ systems are so strong that they can be detected readily, and emissions of the A¹Π–X¹Σ⁺ and D¹Π–A¹Π systems can be observed through spectroscopy only by a significant effort. There is a strong great similarity between spontaneous emissions of the A¹Π–X¹Σ⁺ system of the AlO⁺ cation and the A²Π–X²Σ⁺ system of the AlO radical. The emissions of the A²Π–X²Σ⁺ system of the AlO radical have been measured in outer space Therefore, it is highly possible that the emissions of the A¹Π–X¹Σ⁺ system of the AlO⁺ cation can be detected in the astrophysical media.